Svantek SV100 Whole Body Vibration Analyser
- Its main functionality is establishing remote communication with Svantek instruments with remote communication capabilities (i.e SV200, SVAN977). SvanPC+RC supports downloading measurement results from instruments to PC and also manages instrument settings (Setup Editor).
- . SvanPC+ runs on both 32bit and 64bit platforms, however USB driver and hence downloading files from the instruments using USB port is currently available only for 32bit operating systems.
Whole Body Vibration Test Procedure
Svantek Drivers
Honeywell Safety & Productivity Solutions - Technical Support Community. Here are helpful hints to be use with Vista and Windows 7: Working units will have a MAC address In 'Intermec Settings' 'SmartSystem information' 'Identity'. SvanPC offers the Wave Analyser that is designed for analysis of wave files from Svantek’s noise or vibration instruments. The module provides calculation of overall results such as Leq, Lmax, Lmin, Lpeak as well as 1/3 octave and FFT calculations.
- Load Svantek software and driver
- Plug the SV100 into the PC
- Run the SvanPC+ software
- Click 'Update RTC' (To Sync the clocks) Then OK
- Clock 'Setup editor' Set the following:
a. Click 'Return all settings to default'
b. Click Logger :VDV
c. Mode: Simple dosimeter
d. Standard: English
e. Alarm: Both Off - to be continued......
This is the Whole Body Vibration Good Practice Guide. This document details the testing methodology.
To access the software you need to install the driver and install the Svantek software. You connect the instrument to the PC via the USB adapter. The USB connector also powers the SV100.
Additional Resources
- Related Pages
Noise Monitoring Terminal
Svantek Drivers Installer
The SV 307 is a new Noise Monitoring Station dedicated for permanent noise monitoring. The SV 307 integrates Class 1 sound level meter with a modem in the removable waterproof housing. The SV 307 is equipped with a new MEMS microphone with a life-time warranty. The measurement data is stored on the microSD card.
The SV 307 is designed for permanent noise monitoring, it has been equipped with a patented double self-system check: an inbuilt reference sound source producing 100dB at 1 kHz plus real-time check based on reference microphone.
The waterproof housing of SV307 can be removed to get an access to the user interface with a colour display and keypad. The SV 307 has an internal Li-Ion battery and interface for connecting solar panels. A waterproof mains adaptor for charging the battery and powering the station is also included.
Svantek Driver
SvanNET cloud service monitors the wireless communication, powering and access to the SV 307 data. The scope of the basic SvanNET can be extended with multipoint project management that offers data storage in the cloud, data sharing, advanced alarming and reporting features. SvanNET is an on-line solution which means it doesn’t require software installation and is accessible through a web browser. The responsive design enables use of SvanNET on various devices such as smartphones or tablets.